The basic pieces of the dress are done: the underskirt is all pinned into the completed skirt, the bodice is all ready with the waist seam allowance ironed under, and to have a wearable thing, I just need to attach them. If you are doing attached sleeves, attach them to the bodice before you sew the pieces together. I’m doing tie on sleeves because they’re period, and I hate sewing sleeves. Plus, I just have to make one really fancy reversible pair to be forever a Super Fancy Lady. I had wanted to do obnoxious shoulder loopy things, but this is war sewing, and I am already behind schedule.
Before you attach the skirt and bodice, put on the bodice and tug it roughly into the right place, then put on the skirt and check yourself out in the mirror. This is your last chance to easily add or remove any details, like ribbons or edgings. The pieces are really easy to work with separately, and kind of like wrestling a drunken octopus once you’ve put them together. Make sure your look is balanced and that any design choices you made look balanced on YOUR body. If you’re busty, pin those bodice details on and check them before you sew them down since that’s the biggest culprit for things on paintings of Italian dresses that inadvertently make you look weird in real life. (Ok, holding the severed head of John the Baptist would make you look weirder, but badly placed velvet boob rectangles are a close second.)
In my case, I took off the gold ribbons I had planned to run up the front of the purple split front and up the bodice. They weren’t very visible from a distance because it was shiny on shiny, it looked a little off balance over my bust without also having the neckline edged in the same ribbon (oh HELL no not doing that at this point) and sewing them was going to add more time than is worth it for a detail that doesn’t make much impact.
Pro tips for attaching skirt to bodice (you’re almost finished!!!):
1. Change to a heavy duty needle and some serious business thread before you sew through layers of pleats and bodice and linings since it’s easy to have MANY layers of fabric in there. Machine quilting thread or upholstery thread isn’t a bad idea.
For example, where the line goes through this, there are 8 layers of pleat to go through, plus 2 for the bodice, which is ten. Only those raw edges have been serged at the edge and folded in to reduce satin’s notorious fraying. It’s a very, very thin fabric, so the machine will do it, but the actual count on layers at the thickest points is 26, including the ribbon that the skirt is anchored to. My pleats are positioned so that’s kept to a minimum (more like 20), but this is a sewing expedition your machine should be equipped for. This is an extreme number of layers, and my simple linen Italian working class dresses are maybe 8-10 layers.
2. Sew slowly and patiently so you don’t break a bunch of needles in the process or do a bad thing to the innards of your sewing machine. This is like driving up the mountain in second gear. It’s why after breaking a couple of the under-$100 machines doing mighty sewing, I saved up some and sought out a used machine with metal gears instead of plastic. And I learned to slow down and use the right thing for the job.
3. This is often a place where pins don’t really work for holding everything in place. There’s too much fabric, so they warp and bend and can easily cause problems with the seam laying right when you’re done. It’s easier to be patient and hold things where you want them with your fingers, bit by bit. When I was sewing these together, I needed a couple of pins to get it started, and even then had to be careful about them making everything lie awkwardly.
4. Absolutely take the time to turn under the raw edges at the bottom of your bodice and iron them towards the inside with a generous seam allowance before you start. That way you KNOW the waist will look nice and straight, and there’s a lot less effort when you’re actually sewing them skirt into it. You can just sew the skirt to the bodice without turning, but it creates a big, bulky ridge of skirt that is now pointing perpendicularly at your belly. You’ll wind up having to fix that with top stitching, which is quick. However, it never ever looks as good as it would have if you’d spent five minutes with an iron.